WENZHOU YIHENG MACHINERY CO.,LTD
WENZHOU YIHENG MACHINERY CO.,LTD
Add to Cart
Blue Z Purlin Roll Forming Machine 10m/min For Color Steel
Final products display:
Z purlin dimensions table
| Z Purlin | |||||
| Model | Section Size(mm) | Holes distance | |||
| h | b | c | t | mm | |
| Z100 | 100 | 55 | 20 | 2.0-3.0 | 40 |
| Z120 | 120 | 55 | 20 | 2.0-3.0 | Adjustable |
| Z140 | 140 | 55 | 20 | 2.0-3.0 | Adjustable |
| Z150 | 150 | 67 | 20 | 2.0-3.0 | Adjustable |
| Z160 | 160 | 67 | 20 | 2.0-3.0 | Adjustable |
| Z180 | 180 | 67 | 20 | 2.0-3.0 | Adjustable |
| Z200 | 200 | 67 | 20 | 2.0-3.0 | Adjustable |
| Z250 | 250 | 78 | 20 | 2.0-3.0 | Adjustable |
| Z280 | 280 | 78 | 20 | 2.0-3.0 | Adjustable |
| Z300 | 300 | 78 | 20 | 2.0-3.0 | Adjustable |
Technical parameters:
| No. | Hot sale C&Z Purlin forming machine | |
| 1 | Suitable to process | Color steel or Aluminium sheet |
| 2 | Width of the plate | 350-450mm |
| 3 | Roller | 12 steps |
| 4 | Dimensions | 11.8*1.65*1.75m |
| 5 | Power | 18.5 kw or customized |
| 6 | Thickness of the plate | as request |
| 7 | Productivity | 10-12m/min |
| 8 | Material of the cutting blade | GCr12 |
| 9 | Diameter of the roller | Φ80mm |
| 10 | Weight | About 9T |
| 11 | Voltage | 380V 50Hz 3phases |
| 14 | Control system | PLC control |
Un-coiler System
Usage: It is used to support the steel coil and uncoil it in a turntable way.
You may choose manual or full automactic.
Spare parts ( for free)
1. Easy damaged parts: conk 2 pcs, fuse-link 4 pcs;
2. Rubber mat 1 pcs;
3. Bolt spanner 1 pcs
Note for use and maintenance
1) before use,you must check whether all connections are steady,whether bolts and
nuts are tightinstallation.when start the machine,you must make sure there are enough
lubrication oil in the case.
2) when start the machine commissioning,the machine should run idle,then check it
carefully such as noise,vibration and whether the oil window works smoothly,whether
every parts movement coordination.
3) You must cut off power when install the mould,move the motor belt and big gear by
hand,turn the workbench and make sure the slide up to the highest point.
4) It's better to arrange a support between workbench and slide bottom,just in case
dropping and accident happens.
